D-Link N300 User Manual page 31

Section 3 - Web-based Coniguration
If you selected Static IPv6, you will see the following settings.
You must enter values for all the settings.
IPv6 Address: Enter the IPv6 address.
Subnet Preix Enter the length of the subnet preix.
Length:
Default Enter the default gateway.
Gateway:
Primary DNS Enter the IP address of the primary DNS Server.
Server:
Secondary Enter the IP address of the secondary DNS Server.
DNS Server:
If you selected Autoconiguration (SLAAC/DHCPv6), you will
see the following settings.
You can either choose to obtain IPv6 DNS Servers
automatically, or enter the servers you wish to use.
Primary DNS
Enter the primary DNS Server address.
Server:
Secondary
Enter the secondary DNS Server address.
DNS Server:
D-Link DAP-1320 User Manual 28