Table of Contents
Advertisement
2
Touch
and choose Send.
Choose Bluetooth.
3
Touch Yes to turn Bluetooth on.
4
Your KU990i will automatically search
for other Bluetooth enabled devices
within range.
5
Choose the device you want to send
the file to and touch Select.
6
Your file will be sent.
TIP!
Keep an eye on the progress
bar to make sure your file is sent.
To receive a file:
1
To receive files your Bluetooth must be
both On and Visible. See change your
Bluetooth setti ngs below for more
information.
2
A message will prompt you to accept
the file from the sender. Touch Yes to
receive the file.
3
You will see where the file has been
saved and you can choose to View
the file or Use as wallpaper. Files will
usually be saved to the relevant folder
in My Stuff.
To change your bluebooth settings:
1
Touch
and choose Settings.
2
Choose Bluetooth then Settings.
Make your changes to:
My device visibility - Choose to be
Visible or Hidden.
My device name - Enter a name for
your KU990i.
Supported services - Choose how
to use Bluetooth in association with
different services. See Using your
phone as a modem or Using a
Bluetooth headset.
My address - Change your Bluetooth
address.
Pairing with another Bluetooth
device
By pairing your KU990i and another
device, you can set up a passcode
protected connection. This means your
pairing is more secure.
127
Advertisement
Table of Contents
