Table of Contents
Advertisement
Setting menu
Connection title - Access Point profile
name.
Bearer - Choose the bearer from the list.
(Default is UMTS.)
Authentication - Choose the
authentication from the list. (Default is
No auth)
User name - Information provided by
service provider.
Password - Information provided by
service provider.
APN - APN name to access network.
Information provided by service provider.
Tap [Save] to save any configuration
changes.
USB connection mode
You can choose one mode of Data
service and Mass storage.
When you have finished using the phone
memory, take the following steps.
You can use PictBridge printer in Data
service mode
118
Caution!
Before you remove the
cable, it is necessary to keep the
following steps. Or, the integrity of
transferred data is not guaranteed.
1. Click on the notification area.[Unplug
or Eject Hardware]
2. Select USB Mass Storage Device, click
on Stop.
The following message will appear: "The
'USB Mass Storage Device' device can
now be safely removed from the system"
3. Then remove the cable.
TIP!
When you save a PC file into
the mass storage, the filename
must consist of up to 62 characters
and 255 characters or less
including the path of directory may
be displayed on your phone.
Advertisement
Table of Contents
