― Assembly
1) Insert CAMERA F-PCB into connector
1
putting SILK line.
2) Attach insulating tape on CONNECTOR.
Check correctly attaching insulating tape.
1)
1) Attach the LCD module to the Folder.
3
2) Combine LCD CONNECTOR, attach
insulating tape for preventing unfasten.
3) Insert Camera.
1) Check correctly inserting Camera Module.
2)
Care with torn of F-PCB.
This Document can not be used without Samsung's authorization
.
.
SAMSUNG Proprietary-Contents may change without notice
Exploded View/Disassembly&Assembly Instructions
1) Through LCD CONNECTOR into Hinge.
2
2) Hold F-PCB HOLE
1) Care with torn of F-PCB.
4
1) Attach SHIELD TAPE making meet standard
1) Check correctly attaching tape.
5-9
SHEET.