Exploded View/Disassembly&Assembly Instructions
1) Release the F-PCB HOLE
17
2) Release LCD MODULE from FOLDER side.
3) Remove LCD CONNECTOR through HINGE.
1) Care with torn of F-PCB.
This Document can not be used without Samsung's authorization
SHEET.
SAMSUNG Proprietary-Contents may change without notice
1) Remove all SHIELD TAPE on the PBA.
18
2) Remove insulation tape of CAMERA F-PCB
CONNECTOR side.
3) Hold LOCKER and separate CAMERA MODULE
1) Care with torn of F-PCB.
Slowly separate for no damage to CAMERA.
2)
5-8