Appendix; Projected Image Size; Red Led Behavior And Projector Errors - InFocus X3 User Manual

Appendix

Projected Image Size

NOTE: Visit our website for an interactive image size calculator.
Range of distance to the screen for a given screen size for the
Diagonal
Screen Size Image Width
(inches/m) (inches/m)
50/1.3 40/1
60/1.5 48/1.2
100/2.5 80/2
150/3.8 120/3.1
200/5.1 160/4.1
Table 2:
projector
Distance to screen
Maximum Minimum
distance Distance
(feet/m) (feet/m)
7.8/2.4 6,5/2.0
8.8/2.7 7.5/2.3
14.6/4.5 12.4/3.8
22.6/6.9 19.03/5.8
30.5/9.3 25.2/7.7

Red LED Behavior and Projector Errors

If the projector is not functioning properly and the LED is blinking red, con-
sult Table 3 to determine a possible cause. There are two-second pauses
between the blinking cycles. Visit our website for more details on the red
LED error codes.
Red LED Behavior
One (1) blink
Three (3) blinks
Four (4) blinks
Five (5) blinks
44
Table 3: LEDs
Explanation
The lamp won't strike after five (5)
attempts. Check the lamp and lamp door
installations for loose connections.
The projector has shut down. Check to
see if the lamp door is open. If the lamp
door is closed, toggle off the projector
and wait one minute, then toggle the pro-
jector on again. If the lamp does not strike
after one minute, replace the lamp. Con-
tact Technical Support (see page 28) for
repair if replacing the lamp does not solve
the problem.
The fan has failed. Contact Technical Sup-
port (see page 28) for repair.
The projector is overheating. Check for a
blocked air vent or clogged lamp housing
screen (previous page). Contact Technical
Support for repair if clearing the vents/
screens does not solve the problem.