Table of Contents
Advertisement
Intended use
The SOL T7 is intended for DVB-T television reception and playback. USB flash drives
and hard disks can be used via the USB 2.0 connection. You can also use MS, MMC, SD
and SDHC memory cards with this device. Video, music and image files found on the
above mentioned storage media can be used with this device.
Please adhere to all of the safety information/instructions found in this instruc-
tion manual!
Explanation of symbols
An exclamation mark is intended to inform the user of important information,
operation or maintenance instructions or that special attention is required.
This symbol is intended to alert you to the presence of unprotected, live parts
or components found within the product's enclosure or of dangerous connec-
tions that upon contact may be of sufficient magnitude to constitute a risk of
electric shock. Cables intended for such connections should only be connected
by qualified personnel or you should only use ready to connect cables. There
are no user-serviceable parts found inside the device, therefore the device is
never to be opened.
6
Chapter 1 Intended use
1
Safety information
Dear Customer:
The following safety and hazard warnings are not only for the protection of your de-
vice, but also serve as a protection against potential health hazards. Please take time to
read the following instructions carefully.
We assume no liability for personal or property damage resulting from
the failure to comply with the safety instructions, improper operation
and handling. Under such circumstances, all claims under warranty will
become void.
› For safety and licensing (CE) reasons any unauthorized modification and/
or change on the device is prohibited and will void the warranty and all
warranty claims.
› Any persons operating, installing, setting up, or servicing this device must
be trained and qualified accordingly and observe these operating instruc-
tions.
› Ensure that the device has been set up accordingly by following all in-
structions found in the instruction manual.
› Power supply cords should be routed so that they are not likely to be wal-
ked on or pinched by items placed upon or against them, paying particu-
lar attention to cords at plugs, convenience receptacles, and the point at
which they exit from the device. Avoid exposing the cable to extreme heat
or cold. Never modify/change the cable. This could otherwise damage the
cable and result in the dangerous risk of electric shock.
› Should any evident damage be seen on the device or on the connection
cables, do not come in contact with or touch these. Switch off the corre-
sponding circuit breaker in the power distribution panel first before care-
fully unplugging the power plug from the wall outlet. Do not operate this
device further! Please contact or take it to a qualified service technician/
specialty workshop.
2
Chapter 2 Safety information
7
Advertisement
Table of Contents
