Table of Contents
Advertisement
Repairs are only to be carried out by qualified personnel, who are familiar with the
hazards involved and the relevant regulations.
Transporting or sending the device
Please retain the original box and the packaging material in case you need to transport
or send the device out for maintenance at a later date. Please note that the device
should be repacked in the original packaging. The box and packaging have been es-
pecially developed for this device in order to protect it during transport and against
damage. Retain this instruction manual for future reference and where required pass it
along with the device if handed over to a third party.
Keeping the external case clean
Never use volatile fluids near the device, as for example insect spray. Avoid letting the
device come in contact with rubber or plastic products for longer periods of time. The-
se could otherwise leave marks behind.
Cleaning the device
Unplug the power cable before cleaning. Always use a soft and dry cloth to clean the
unit's exterior. If the device is extremely dirty you can use a soft cloth, dampened with
water or a mild cleaning solution to clean. Never use any abrasive or harsh cleaning
agents (e.g. alcohol, benzine or thinners) as these could damage the controls, casing or
any markings and labels found on the device.
Contribute to a better environment by using a designated disposal system (e.g. Dual
System in Germany) or recycling site for the disposal of packaging material.
34
Chapter 10 Maintenance, handling and cleaning
Chapter 10 Maintenance, handling and cleaning
35
Advertisement
Table of Contents
