Advertisement
Unpacking
When unpacking, check to make sure all parts listed on page 2 are included. If any parts are missing or
broken, please call Buffalo Tools at 1-800-568-6657.
Product Use
This Tile Saw is designed for cutting small and medium size tile. It is equipped with a diamond cutting blade for
excellent cutting results. This steel worktop tilts up to 45 degrees for cutting desired angles.
Before using this saw, read the instructions completely. Pay particular attention to all safety rules. Practice the
maintenance instructions to ensure your machine always operate efficiently and safely.
Prior to operating this machine, familiarize yourself with the controls and make sure you know how to stop it
quickly if needed.
Special Safety Instructions While Using The Machine
1. Never use a cracked diamond saw blade. Change worn blades before using.
2. Make sure the switch is in the "OFF" position before connecting the machine to the main voltage.
3. Always keep the cord away from moving parts of the machine.
4. Do not apply side-pressure to the saw blade. It can break.
5. Do not saw tiles that are too small to lead through.
6. Lower the saw blade protector over the saw blade after use.
7. Disconnect from power supply source before you open the machine.
Installing The Blade Guard
(Refer to Figure 1) Attach the Blade Guard to the Tile
Saw, by unscrewing the Bolt, from the Nut and Blade
Guard, being careful not to loose the Nut. Place the
Blade Guard over the Blade. Align the hole on the
Support Bracket with the holes on the Blade Guard.
Place the Bolt through the Blade Guard, Riving Knife,
Figure 1
and Nut and tighten.
TCUT7UL 7" Bench Top Tile Saw
7
Advertisement
