Advertisement
RESET and LOCK buttons funciton
1. When you press the recessed LOCK button,
all current settings are locked in and remote
SET TEMPERATURE( F)
O
controller does not accept any operation
AUTO
FAN
except that of the LOCK.
HIGH
COOL
MED
DRY
LOW
Use the LOCK mode when you want to pre-
HEAT
vent settings from being changed accidentally.
TEMP
Press the LOCK button again when you want
ON/OFF
to cancel the LOCK mode.
MODE
FAN SPEED
A lock symbol will appear on the bottom right
SWING
ECONOMY
TIMER ON
hand side of the remote controller display
TIMER OFF
RESET LOCK
1
2
when the LOCK function is activated.
FOLLOW
LED
ME
DISPLAY TURBO
2. When you press the recessed RESET button,
all current settings are cancelled and return
to original factory settings.
SWING button function
Use the SWING button to activate AUTO
swing function and lock louver in desired
position.
1. When press this button once and quickly,
O
SET TEMPERATURE( F)
the air flow direction setting feature of
FAN
AUTO
HIGH
COOL
the louver is activated. The swing
DRY
MED
HEAT
LOW
angle of the louver is 6 for each press.
TEMP
Keep pressing the SWING button to
move the louver to the desired position.
ON/OFF
MODE
FAN SPEED
2. When press the button without releasing
SWING
ECONOMY
TIMER ON
1
for 2 more seconds, the auto swing
TIMER OFF
RESET LOCK
feature is activated. The horizontal louver
FOLLOW
LED
ME
DISPLAY TURBO
would swing automatically. Press it again
to stop.
NOTE: When the louver swing or move to
a position which would affect the
cooling or heating effect of the air
conditioner, it would automatically
change the swinging/moving
direction(upward or downward).
12
Cautions
1. When replacing batteries, do not use old batteries or different type
batteries. Otherwise it may cause the remote controller to malfunction.
2. If you do not use the remote controller for a few weeks or more, remove
the batteries. Otherwise, battery leakage may damage the remote
controller.
3. The average battery life during normal use is approximately half a year.
Replace the batteries when there is no receiving beep from the indoor
unit or if the transmission indicator on the remote controller fails to light.
4. Be sure there are no barriers between the remote controller and the receiver
of indoor unit otherwise the air conditioner will not work.
5. Keep the Remote Controller away from all liquids.
6. Protect the Remote Controller from high temperatures and exposure to
radiation.
7. Keep the indoor receiver out of direct sunlight or the Air Conditioner may
malfunction.
8. Keep controller away from EMI (Electro-Magnetic Interference) supplied by
other household appliances.
o
13
Advertisement
