Advertisement
SLEEP Button: Press this button to go into the Energy-Saving
11
operation mode. Press it again to cancel. This function is only
can be used on COOL, HEAT and AUTO mode and maintain the
most comfortable temperature for you.
NOTE: While the unit is running under SLEEP operation
mode, it would be canceled if you press the MODE,FAN
SPEED or ON/OFF button.
TIMER OFF Button: Press this button to initiate the auto-off time
12
sequence. Each press will increase the auto-timed setting in 30
minutes increments. When the setting time displays 10h, each
press will increase the auto-timed setting 60 minutes increments.
To cancel the auto-timed program, simply adjust the auto-off time
to 0.0
LOCK Button: When you press the recessed LOCK button, all
13
current settings are locked in and the remote controller does not
accept any operation except that of the LOCK. Press again to
cancel the LOCK mode.
14
TURBO Button: Push this button on COOL mode, the air con-
ditioner goes into powerful cooling operation. Push again to
cancel the TURBO function(Not availabe for the air conditioner
without TURBO function).
Note:
Buttons design might be slightly different from the actual
one you purchased depending on individual models.
All the functions described are accomplished by the indoor
unit. If the indoor unit has no this feature, there is no
corresponding operation happened when press the relative
button on the remote controller.
4
Indicators on display panel
Mode display
Displays the current selected mode.
Including AUTO, COOL, DRY , HEAT
(cooling & heating models only) and
FAN.
Transmission Indicator
This transmission indicator will light
when remote controller transmits
signals to the indoor unit.
Temp./Timer display
The temperature setting (from 62 F
to 86 F) or timer setting (0~24h) will
be displayed. If FAN mode is
selected, there will be no display.
ON/OFF display
This indicator will be displayed when
the unit is operating.
Mode display(FAN mode)
Fan speed display
SET TEMPERATURE
Displays the selected fan speed:
AUTO, HIGH, MED and LOW.
Nothing displays when the fan speed
is selected in AUTO speed. When
TIMER ON OFF
AUTO or DRY Mode is selected, there
will be no signals displayed.
FOLLOW ME display
When pressing FOLLOW ME button
in COOL or HEAT mode, the remote
sensing function is activated and this
indicator displays.
TIMER display
This display area shows the settings
of the TIMER. That is, if only the
Auto-on time function is set, it will
display TIMER ON. If only the Auto-off
time function is set, it will display
TIMER OFF. If both functions are
set, it will display TIMER ON OFF
which indicates you have chosen both
the Auto-on time and Auto-off time.
LOCK Indicator
LOCK display is displayed when
pushing the LOCK button. Push the
LOCK button to clear display.
5
O
O
Advertisement
