Advertisement
TIMER operation
To press the TIMER ON button can set the auto-on
time of the unit. To press the TIMER OFF button
can set the auto-off time of the unit.
O
SET TEMPERATURE( F)
FAN
AUTO
To set the Auto-on time.
HIGH
COOL
DRY
MED
HEAT
LOW
1. Press the TIMER ON button. The remote
TEMP
controller shows TIMER ON, the last Auto-on
setting time and the signal "h" will be shown on
MODE
ON/OFF
FAN SPEED
the LCD display area. Now it is ready to
SWING
ECONOMY
TIMER ON
1
reset the Auto-on time to START the operation.
TIMER OFF
RESET LOCK
2. Push the TIMER ON button again to set desired
FOLLOW
LED
ME
DISPLAY TURBO
Auto-on time. Each time you press the button,
the time increases by half an hour between 0
and 10 hours and by one hour between 10 and
24 hours.
3. After setting the TIMER ON ,there will be a one-
half second delay before the remote controller
transmits the signal to the air conditioner. Then,
after approximately another 2 seconds, the
SET TEMPERATURE( F)
O
signal "h" will disappear and the set temperature
FAN
AUTO
HIGH
COOL
MED
DRY
will re-appear on the LCD display window.
LOW
HEAT
TEMP
To set the Auto-off time.
ON/OFF
MODE
FAN SPEED
1. Press the TIMER OFF button. The remote
SWING
ECONOMY
TIMER ON
controller shows TIMER OFF, the last Auto-off
TIMER OFF
RESET LOCK
1
setting time and the signal "h" will be shown on
FOLLOW
LED
ME
DISPLAY TURBO
the LCD display area. Now it is ready to
reset the Auto-off time to START the operation.
2. Push the TIMER OFF button again to set desired
Auto-off time. Each time you press the button,
the time increases by half an hour between 0
and 10 hours and by one hour between 10 and
24 hours.
3. After setting the TIMER OFF ,there will be a one-
half second delay before the remote controller
transmits the signal to the air conditioner. Then,
after approximately another 2 seconds, the
signal "h" will disappear and the set temperature
will re-appear on the LCD display window.
8
!
CAUTION
The effective operation time set by the remote controller for the timer
function is limited to the following settings: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0,
3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10, 11, 12, 13,
14, 15,16,17, 18, 19, 20, 21, 22, 23 and 24.
Example of timer setting
TIMER ON
(Auto-on Operation)
The TIMER ON feature is useful
h
when you want the unit to turn on
TIMER ON
automatically when you return home.
The air conditioner will automatically
start operating at the set time.
Start
Off
Example:
To start the air conditioner in 6 hours.
1. Press the TIMER ON button, the
Set
6 hours later
last setting of starting operation
time and the signal "h" will show
on the display area.
2. Press the TIMER ON button to
display "6.0h" on the TIMER ON
display of the remote controller.
3. Wait for about 3 seconds and the
digital display area will show the
temperature again. Now this
function is activated.
9
Advertisement
