Advertisement
Auto operation
When you set the air conditioner in AUTO
mode, it will automatically select cooling,
heating (Cooling & Heating models only),
or fan only operation depending on what
temperature you have selected and the
O
SET TEMPERATURE( F)
room temperature.
FAN
AUTO
HIGH
COOL
MED
Once you select the operating mode,
DRY
HEAT
LOW
the operating conditions are saved in
TEMP
the unit's microcomputer memory.
2
3
Thereafter, the air conditioner will start
ON/OFF
MODE
FAN SPEED
1
operating under the same conditions
SWING
ECONOMY
TIMER ON
when you simply push the ON/OFF
TIMER OFF
RESET LOCK
button of the remote controller.
FOLLOW
LED
ME
DISPLAY TURBO
Ensure the unit is plugged in and power
is available. The OPERATION indicator
on the display window of the indoor unit
illuminates.
1. Use the MODE button to select AUTO.
2. Push the TEMP button to set the
desired temperature within a range of
O
62 F ~ 86 F.
3. Push the ON/OFF button to start the
air conditioner. The FAN SPEED is
automatically set and there are no fan
speed indicators shown on the display
panel of the remote controller.
4. Push the ON/OFF button again to stop
the unit operation.
NOTE
1. In the AUTO mode, the air conditioner
can logically choose the mode of COOL,
FAN and HEAT by sensing the difference
between the actual ambient room
temperature and the set temperature on the
remote controller.
2.If the AUTO mode is not comfortable for you,
the desired mode can be selected manually.
6
O
COOL/HEAT/FAN operation
Ensure unit is plugged and power is available.
1. Press the MODE button to select COOL,
HEAT (Cooling & Heating models only), or
FAN mode.
O
SET TEMPERATURE( F)
2.
Push the TEMP button to set the
AUTO
FAN
COOL
HIGH
desired temperature within a range of
MED
DRY
LOW
HEAT
O
O
62 F ~ 86 F.
TEMP
3.
Push the FAN SPEED to select the FAN
2
4
mode of AUTO, HIGH,MED or LOW.
MODE
ON/OFF
FAN SPEED
3
1
4. Press the ON/OFF button to start the air
TIMER ON
SWING
ECONOMY
conditioner. The OPERATION indicator
TIMER OFF
RESET LOCK
on the display panel of the indoor unit
FOLLOW
LED
ME
DISPLAY TURBO
illuminates.
again to stop this unit operation.
NOTE
The FAN mode can not be used to
control the temperature. While in this
mode, only steps 1 3 and 4 may be
performed.
DRY operation
Ensure unit is plugged and power is available.
SET TEMPERATURE( F)
O
The OPERATION indicator on the display
AUTO
FAN
panel of the indoor unit starts flashing.
HIGH
COOL
MED
DRY
LOW
HEAT
1. Push the MODE button to select DRY.
2. Push the TEMP button to set the
TEMP
2
desired temperature within a range of
3
ON/OFF
MODE
FAN SPEED
O
O
1
62 F ~ 86 F.
SWING
ECONOMY
TIMER ON
3. Push the ON/OFF button, the OPERATION
TIMER OFF
RESET LOCK
lamp lights and the air conditioner starts
FOLLOW
LED
ME
DISPLAY TURBO
to operate in DRY mode at LOW fan
speed. Push the ON/OFF button again to
stop this unit operation.
Note: The fan speed cannot be adjusted
when the unit is in AUTO and DRY mode.
7
Push the ON/OFF button
Advertisement
