InFocus LP330 User Manual page 45

Problem: Image is out of focus
Turn the projection lens to focus the image.
•
Make sure the projection screen is at least 5 feet (1.5 m) from
•
the projector.
Check the projection lens to see if it needs cleaning.
•
Problem: Image and menus are reversed left to right
Rear projection mode is probably turned on. Turn Rear Projec-
•
tion off in the Controls menu. The image should immediately
return to forward projection. See "Rear Projection" on
page 24.
Problem: the projector displays vertical lines, "bleeding" or
spots
Adjust the brightness. See "Brightness" on page 19.
•
Check the projection lens to see if it needs cleaning.
•
Problem: no sound
Adjust volume.
•
Verify audio/input connections.
•
Adjust audio source.
•
Problem: Image is "noisy" or streaked
Try these steps in this order.
1 Deactivate the screen saver on your computer.
2 Turn
Auto Image
Image" on page 21.
3 Turn
Auto Image
ing manually to find an optimal setting. See "Manual Sync"
on page 21 and "Manual Tracking" on page 22.
The problem could be with your computer's video card. If
•
possible, connect a different computer.
off and then back on again. See "Auto
off and adjust the synchronization and track-
33