Standby
When you press
standby
blank screen is displayed for 15 minutes. You can change the
amount of time the projector stays in standby mode; see
"Standby Time" on page 23 for details.
If you press
•
standby
returns to normal operations immediately.
If you press
•
standby
60 second delay before the lamp turns back on.
If you don't press
•
minutes.
Volume (keypad only)
To increase the volume, press
ume, press
volume -
Volume adjustments are saved for each source you have con-
nected.
, the display and audio turn off and a
again within 15 minutes, the projector
again after 15 minutes, there is about a
again, the lamp turns off after 15
standby
volume +
.
To decrease the vol-
.
17