Connecting A Computer - InFocus LP330 User Manual

Connecting a Computer

1 Plug one end of the VESA computer cable into the video con-
nector on your computer.
2 Plug the other end of the VESA computer cable into the
connector on the projector.
Do you want to play your computer's audio on the projector?
1 Plug either end of the audio cable into the audio connector on
your computer.
2 Plug the other end of the audio cable into the
on the projector.
audio cable
VESA cable
Connecting the projector to a computer
NOTE: Many laptop computers
do not automatically turn on their
external video port when a sec-
ondary display device such as a
projector is connected. Refer to
your computer manual for the
command that activates the exter-
nal video port. Activation com-
mands for some laptop computers
are listed in the Appendix of this
manual on page 38 and in the
F 5
IGURE
Service section of our website.
NOTE: If you are connecting an
older Macintosh computer that
connector
does not have a 15-pin connector,
you must use a Mac adaptor
between the computer and the
projector. See "Optional Accesso-
ries" on page 37.
7