Important Safety Instructions Dear SunBriteTV Customer: Congratulations on your ownership of the SunBriteTV Model 5510HD. This product is designed as a weatherproof LCD television that can be installed outdoors. To ensure safety and minimize mechanical malfunctions of your product, please read the Important Safety Instructions carefully before using this product.
When the TV is not in use, it is important to keep it covered with the SunBriteTV fi tted Outdoor Dust Cover. Use a soft brush or towel to remove snow and ice from the TV. In areas where dust or salt air is prevalent, it is recommended that the fi ber fi lter be cleaned regularly (see instructions on Page 43).
Page 4
However, it is not designed to withstand pressure washers, high-pressure water jets, or hurricane-type weather. Do not service SunBriteTV yourself: Removal of the television screen cover may expose you to high voltage or other dangerous risks. Refer all servicing to a qualifi ed service professional. Warranty will not be honored if you service the unit yourself.
Features Information and Instructions Internal Thermostatically-Controlled Heater Programming Other Manufacturers’ Universal Remote Control Devices SunBriteTV Pixel Quality Policy Appendix A - RS232 Control Codes Appendix B - RS232 Control Cable Pinout SunBriteTV Model 5510HD Operator’s Manual Page 5 Page 5...
Supplied Accessories Unpacking After unpacking the SunBriteTV television, please make sure that the following items are included in the carton and that they are in good condition. If items are damaged or missing, contact your dealer immediately. SunBriteTV LCD Television Model 5510HD Remote Control with Batteries Operator’s Manual...
Speaker Cable Wire should not be placed across the bottom of the Rubber Sealing Gasket (Figure 6). Figure 6 Figure 4 Figure 5 Speaker Connector Thumb Screws Connect Source Cover Rubber Sealing Gasket Speaker Cable Speaker Cable Wire should not come out of this area SunBriteTV Model 5510HD Operator’s Manual Page 7...
TV Installation – Rear Panel Internal Connect Source Rear Panel Connections WARNING: Do not connect the power source before making connections. Internal Connect Source The Internal Connect Source allows you to easily connect to the Audio, Video, S-Video, SVGA, HDMI, Audio Out, RF, RS232, and 12 VDC connectors, and the IR emitter window.
IR Emitter placed over the IR Window and Appendix B for a Control Cable Pinout Diagram.) 15. 12 VDC - This port is for the SunBriteTV FM Radio (Item SB-FM 461) connector only. Emitter Window: Cable end that will be attached to an Figure 15 shows an Emitter* installed.
Page 10
TV Installation – Rear Panel Connections Cable Descriptions: Connection Descriptions: Blue Green Yellow Green White Orange Page 10...
Page 11
2. The TV’s tuner is designed for HDTV therefore requires a stronger signal than normal TVs. If you cannot achieve that signal level with your antenna or cable, your 5510HD might lose picture or sound. 3. This TV will turn off automatically if there’s no signal present for more than 15 minutes.
Page 12
3. Use a Coaxial RF cable and connect from your 3. The MODEL 5510HD’s tuner is designed for HDTV therefore VCR’s Antenna Out or Output to TV to the ATSC/ requires a stronger signal than normal TVs. If you cannot achieve NTSC port of your TV.
Page 13
DVD player and Composite’s white connector port off the back of your TV. connector port off the back of your MODEL 5510HD. Connect the red color connector to both your DVD player Connect the red color connector to both your DVD player and Composite’s red connector port off the back of your TV.
Page 14
HDMI 2. Connect the red color connector to both your set-top box and SunBriteTV’s MODEL 5510HD supports SONY’s universal Component 1’s red connector port off the back of your TV to the right side of your green, blue, red component connection.
Page 15
DVD player and Composite’s white connector port off the back of your TV. connector port off the back of your MODEL 5510HD. Connect the red color connector to both your DVD player Connect the red color connector to both your DVD player and Composite’s red connector port off the back of your TV.
Page 16
TV Installation – Rear Panel Connection Diagrams CONNECTING TO AN EXTERNAL AMPLIFIER OR AMPLIFIED SPEAKERS Connecting with Coaxial SPDIF Digital (Best) Connecting with RCA Audio Analog (Good) 1. Make sure the power of the TV and your receiver is turned 1.
Page 17
3. If HDMI 1 is already occupied, please use HDMI 2 as your connection port and switch source to HDMI 2. 4. This TV will turn off automatically if there’s no signal present for more than 15 minutes. SunBriteTV Model 5510HD Operator’s Manual Page 17...
Page 18
TV Installation – Rear Panel Connection Diagrams CONNECTING TO GAME CONSOLES (Continued) 1. Make sure the power of the TV and your Xbox 360 is turned off . 2. Obtain the Xbox 360 Component Cable. Connect the green color For the Xbox™ connector to Component 1’s green connector port on the back of For the Playstation 3 the TV.
In OSD menu, both keys are used to navigate within the menu. Adjusts volume. Vol+ /Vol- In OSD menu, both keys are used to navigate within menu. Vol+ is used to select the highlighted options. Front Panel IR Sensor SunBriteTV Model 5510HD Operator’s Manual Page 19...
Remote Control Guide ON – Powers the TV On. OFF – Powers the TV Off . 0~9 – Sets the channels. Dash (-) – Inserts the dash for selecting digital channels directly. R – Returns to the previous channel. FREEZE – Freezes the TV picture. CC – Cycles between diff erent closed captioning modes.
Page 21
The functionality of the remote control is under warranty for one year. If the remote control malfunctions within the one-year warranty period, replace the batteries with new long-life alkaline batteries. If the problem is not solved with new batteries, contact the SunBriteTV Customer Support Team. SunBriteTV will repair or replace the remote control at SunBriteTV’s option.
On-Screen Display Menu - Picture Menu Picture: Audio: Time: Setup: Lock: Channel: This function This menu This menu This menu This menu This menu changes manages manages the manages manages manages Channel the picture the audio time functions Language, parental functions such settings for all settings such...
The language code must be programmed for this option to be available. If there is no selection it has not been programmed for this model. Note: SPDIF Type and Audio Language are available only in DTV. SunBriteTV Model 5510HD Operator’s Manual Page 23...
Adjusting On-Screen Displays – Time Menu Time Menu Sleep Timer 1. Press buttons to move the cursor to the item to be selected. Press buttons to Sleep Timer, then use 2. Press buttons to make the desired adjustments. buttons to select the sleep timer.
Auto Press buttons and then press OK button to perform the Auto Adjust function that automatically adjusts the available options for the best viewing confi guration. SunBriteTV Model 5510HD Operator’s Manual Page 25...
Page 26
Adjusting On-Screen Displays – Setup Menu Closed Caption From the Setup Menu, press buttons to Closed Caption, then press button to enter the Closed Caption submenu list shown below. Closed Caption Submenu Basic Selection Press buttons and then use buttons to select current zoom mode, the options are CC1 / CC2 / CC3 / CC4 / TEXT1 / TEXT2 / TEXT3 / TEXT4.
Page 27
Adjusting On-Screen Displays – Setup Menu XVS (Dynamic Luminance Control) From the Setup Menu, press buttons to XVS, to enter the XVS menu. Use the buttons to select ON or OFF. SunBriteTV Model 5510HD Operator’s Manual Page 27...
Adjusting On-Screen Displays – Lock Menu Lock Menu Press buttons to move the cursor to the Enter Password selection. Press “Enter Password” to enter the password. (The default password is 0000.) To change the Password, press the button to enter the Lock Menu submenu Lock Menu Sub-Menu Change password...
Page 29
D: Dialog (sexual) Us Menu MPAA From the Us Menu, press buttons and use buttons to select one of N/A / G / PG / PG-13 / R / NC-17 / X. SunBriteTV Model 5510HD Operator’s Manual Page 29...
Page 30
Adjusting On-Screen Displays – Lock Menu Lock Menu Sub-Menu Canada Press the button to enter the submenu for the Canadian rating functions. Canada Menu Canada English Press the button to select one of E / C / C8+ / G / PG / 14+ / 18+.
Press the button to enter the submenu list below Auto Scan Cable system Press the button to select the cable system. Start to Scan Press the button to start auto scan. SunBriteTV Model 5510HD Operator’s Manual Page 31...
Page 32
Adjusting On-Screen Displays – Channel Menu Favorite Favorite From the Channel Menu, press the buttons to select Favorite. Press the button to enter the submenu shown at left. Press keys to select channels, and press OK to add current channel to Favorite Channel Table.
1. Clean the window by using the following directions: To clean the SunBriteTV window, use glass cleaner and a lint-free or micro-fi ber cloth. Spray the solution on the cloth and then apply to the window. DO NOT use acrylic cleaners.
Specifi cations Specifi cations for SunBriteTV Model 5510HD Specifi cations Side View Front View LCD Screen 55-inch diagonal TFT Active Matrix Resolution 1920 x 1080 full-HD 1080p, 120 Hz Frame Rate Aspect Ratio 16:9 Contrast Ratio 5000:1 Viewing Angle Response Time 6.5 milliseconds...
Your SunBriteTV will be replaced under warranty if it meets one of the following criteria: —A total of 7 defective pixels, including both bright dots and dark dots are present. (Model 5510HD LCD TV screen has over a million pixels.) —2 or more pairs of adjacent bright dots are present.
Com Specs: 9600 baud 8 data, 1 stop, no parity Rx Data Tx Data Ground From control to control system system SunbriteTV RS232 Control Cable SIZE FSCM NO DWG NO July 17 2007 Preliminary 1 OF 1 SCALE SHEET Page 38...
Need help?
Do you have a question about the 5510HD and is the answer not in the manual?
Questions and answers