Led Behavior - InFocus LP 840/LP 850 User Manual

LED Behavior

LED color/behavior
Power: blinking green
Temp: N/A
Lamp: N/A
Power: blinking green (once)
Temp: N/A
Lamp: N/A
Power: solid green
Temp: N/A
Lamp: N/A
Power: solid green
Temp: blinking red
Lamp: blinking red
Meaning
The power switch has been toggled
on and the software is initializing, or
the projector is powering down and
the fans are running to cool the lamp.
Power Save or Screen Save.
The power switch has been toggled
on and the software has initialized or
the projector has been powered off
via the remote.
If Temp and Lamp are flashing simulta-
neously, the filter hasn't been cleaned
in 100 hrs.
If Temp and Lamp are flashing simulta-
neously (twice), the cooling air filter
may be dusty. Please see "Cleaning
the dust filter" on page 42.
If Temp and Lamp are flashing alter-
nately, the projector is below temper-
ature specifications. Please use the
projector in an environment between
° ° ° °
0 C/32 F to 35 C/95 F. Contact
Technical Support if the problem per-
sists.
Power: solid red
Temp: N/A
Lamp: blinking red
Power: solid red
Temp: blinking red
Lamp: N/A
Power: solid red
Temp: solid red
Lamp: N/A
Power: solid red
Temp: N/A
Lamp: N/A
46
Lamp won't strike (blinks one time)
Lamp has exceeded lamp hours limit
(blinks two times)
Lamp has failed (blinks three times)
Lamp door is open (blinks four times)
Turn off the projector and wait one
minute, then turn the projector on
again. If the projector has exceeded
its lamp life limit, replace the lamp
and reset the lamp timer. Please con-
tact Technical Support if the problem
persists.
Fan failure. Make sure the vents aren't
blocked. Contact Technical Support if
the problem persists.
The projector is overheating. Contact
Technical Support if the problem per-
sists.
Unidentified error. Please contact
Technical Support.