Baxi 829 Installer And Owner Manual page 7

INSTALLER AND OWNER GUIDE
Heater Fixing.
All of the fixings and loose parts supplied with the heater have been identified as in
figure 3.
Figure 3. Loose parts identification (Items are not to scale)
Additional fixings may be required if fitting the heater to a plasterboard wall that has a
wooden frame behind it. In such cases we recommend the use of heavy duty cavity
fixings. If fitting the heater in an elevated position (i.e. above hearth or finished floor
height) then the lower support bracket must be fitted (See figure 3).
The heater must always be fixed into position to prevent it from being tipped over
The following fixing options are available:
Chic, Envy, Serenity and Mirage models.
Screw Fixing !
Wire Fixing
Twilight model.
Screw Fixing !
If fitting the heater into a fireplace or surround opening, try the heater in the opening to
ensure that it will fit.
©
Baxi Heating U.K. Limited 2006.
To a fireplace opening / surround
To a flat wall with the use of the spacer frame
!
To a fireplace opening / surround
!
To a flat wall with the use of the spacer frame
Page 7