Setting Details - Toshiba SD-V330SC Service Manual

Function setup (DVD)
Customizing the function settings (continued)

Setting details

Section Option Details
Menu To select the language of "Menu", "Subtitle" and
Subtitle "Audio" if more than one language are available on
Audio the disc.
E.B.L. To select On or Off for E.B.L. (Enhanced Black
Level).
Tv Screen To select a picture size according to the aspect
ratio of your TV.
Display To turn on or de-activate the operational status dis-
play on the screen.
Picture Mode To select a preferred picture mode from "Video",
"Film" or "Auto".
JPEG Interval To select a preferred setting for the slide show play-
back.
Dialogue To select On or Off for DRC (Dynamic Range Con-
trol).
QSound To select On or Off for QSound.
Password Input 4-digit password to set the parental level.
Parental To select a preferred parental level for the parental
setting.
Select Files To select a preferred file type for playing back a CD
containing a mixture of file types.
Output To select a preferred video output signal from "Pro-
gressive" or "Interlace".
56
Function setup (DVD)
Customizing the function settings (continued)
Setting details
Picture Mode
There are two types of source content in pictures
recorded in DVD video discs: film content (pictures
recorded from films at 24 frames per second) and
video content (video signals recorded at 30 frames per
second). Make this selection according to the type of
content being viewed.
Auto: Select this position normally.
The DVD player automatically detects
source content, film or video, of
playback source, and converts that
signal in the progressive output format
in an appropriate method.
Film: The DVD player converts film content
pictures in the progressive output
format appropriately. Suitable for
playback of film content pictures. The
progressive output feature will be most
effective under this selection.
Video: The DVD player filters video signal,
and converts it in the progressive
output format appropriately.
Suitable for playback of video content
pictures.
Note:
Depending on the disc, pictures may be cut off or
doubled. In this case, select "Video".
JPEG Interval
You can continuously play back all JPEG files automati-
cally.
After the setting below, start playing the disc on which
JPEG files have been recorded.
Off:
Plays back one file at a time.
5 Seconds:
Plays back images in the form of a slide show at
5 second intervals.
10 Seconds:
Plays back images in the form of a slide show at
10 second intervals.
15 Seconds:
Plays back images in the form of a slide show in
15 second intervals.
58
Page
57
58
59
Dialogue Off: DRC (Std)
QSound Off
/Setup/Return
Dialogue
DRC (Dynamic Range Control) enables you to control
the dynamic range so as to achieve a suitable sound for
your equipment.
On: DRC (TV):
Loud sound such as explosion or similar is toned
down slightly when played back. This makes it
suitable for when it is connected to a stereo.
Off: DRC (Std):
It plays back at the recording level on the disc.
Notes:
• This function works only during playback of Dolby Digital
recorded discs.
• The level of Dynamic Range Reduction may differ
depending on DVD video disc.
QSound
This DVD video player equipped with a "QSound". It can
produce the effect of being in a cinema or a concert hall.
On: The QSound operates.
Off: The QSound is disengaged.
Note:
The QSound setting can also be changed with AUDIO on
#
the remote control .
Menu English
Subtitle English
Audio English
/Setup/Return
Menu, Subtitle, Audio
You can select the language of "Menu", "Subtitle" and To select the black level of playback pictures, set your
"Audio" if more than one languages are recorded onto preference and monitor's ability.
the disc.
English, Francais, Espanol:
The selected language will be heard or seen.
Other:
Other language can be selected (see the
$
"Language code list" ).
You have the following screen sizes to choose from:
Original: (Audio)
The unit will select the first priority language of
each disc.
Off: (Subtitle)
Subtitles do not appear.
Notes:
• If the selected language is not recorded on the disc, the
first-priority language is selected.
• If you want to change the OSD language, you can perform
!
it by TV MENU .
Press OPEN/CLOSE to view in the selected screen size.
Note:
If the DVD disc is not formatted in the pan & scan style, it
displays 4:3 style.
On screen display can be switched on or off when you
press the buttons.
4. While holding 7 down on the remote control, press
Password ----
Parental Off
5. Enter a new password again.
Select Files All
Output Interlace
/0Ð9/Enter/Clear/Setup/Return
When playing back a CD containing a mixture of MP3,
WMA and JPEG files, only MP3/WMA or JPEG files can
be displayed on the file menu.
Parental control setting
Some discs are specified not suitable for children. Such
discs can be limited not to play back with the unit.
1) Press C or D to select "Parental", then press B
or A until the level you require appears.
Level Off: The parental control setting does not
•
function.
• Level 8: All DVD software can be played back.
• Level 1: DVD software for adults cannot be
played back.
You can select the video output signal of the DVD
Select from the level 1 to level 8. The limitation will
video player to the TV from "Interlace" or "Progres-
be more severe as the level number is lower.
sive".
2) Press C or D to select "Password".
Press Number buttons (0–9) to input a 4-digit
1) Press C or D to select "Output".
password. Be sure to remember this number!
2) Press A, then press C or D to select "Interlace" or
• If you input a wrong number, press CLEAR.
3) Press ENTER to store the password.
Note: Now the rating is locked and the setting can-
not be changed unless you enter the correct pass
word.
4) Press OPEN/CLOSE to activate Parental control
setting. (See "Temporary disabling of rating level by
$
DVD disc" .)
Notes:
• Depending on the discs, the unit cannot limit playback.
3) Press ENTER.
• Some discs may not be encoded with specific rating
Warning:
level information though its disc jacket says "adult." For
Once "Progressive" is selected when connecting to a
those discs, the age restriction will not work.
TV progressive scan incompatible, no image will be
To change the parental level
seen on the video display.
In this case, you must reset the unit by pressing STOP
1) Press C or D to select "Password".
on the front panel for five seconds. The video output
2) Press Number buttons (0–9) to enter the password
will be restored to "Interlace" setting, and a picture will
you have stored.
once again be seen on a conventional analog display.
3) Press ENTER.
• The rating is now unlocked.
Notes:
4) Press C or D to select "Parental", then press B
• Some discs may not be played back with the progressive
or A to change the parental level.
scanning mode correctly because of the disc characteris-
5) Press C or D to select "Password", then press
tics or recording condition.
Number buttons (0–9) to enter the password.
• Once Progressive scan on, all other video outputs are
Note: You can change the password if you want.
disabled except component video outputs.
6) Press ENTER.
Now the parental level is changed and locked.
Note:
If you forget the password...
If each setup (pages 57~59) has been completed, the unit
1. Press OPEN/CLOSE to open the disc tray.
can always be worked under the same conditions (espe-
2. Remove the disc.
cially with DVD discs).
3. Press OPEN/CLOSE again to close the disc tray.
Each setup will be retained in the memory even if you turn
"No Disc" appears on the screen.
the power off.
E.B.L Off
Tv Screen 4:3
Display On
Picture Mode Auto
JPEG Interval Off
/Setup/Return
E.B.L.
On: Enhanced grey scale (0 IRE cut off)
Off: Standard grey scale (7.5 IRE cut off)
Tv Screen
4:3 (Letter box):
Select this mode when connecting to a conven
tional TV. When playing back a wide screen-DVD
disc, it displays the wide picture with black bands
at the top and bottom of screen.
4:3 (Pan scan):
It displays the wide picture on the whole screen
with left and right edges automatically cut off.
16:9 (Wide):
Select this mode when connecting to a wide-
screen TV. A wide screen picture is displayed full
size.
Display
On: On screen displays appear when you press
the buttons (factory setting).
Off: On screen displays do not appear when you
press any buttons.
57
STOP on the front panel. "PASSWORD CLEAR"
appears on the screen.
Select Files
All:
Displays all files.
Music Only:
Displays only MP3/WMA files.
Pictures Only:
Displays only JPEG files.
Output
"Progressive".
Interlace:
Select when connecting to a composite TV or
a TV equipped with component video inputs
but progressive scan is not compatible.
Progressive:
Select when connecting to a TV equipped
with component video inputs, progressive
scan compatible.
59