Setting Details - Toshiba SD-V330SC2 Service Manual

Function setup (DVD)
Customizing the function settings (continued)

Setting details

Section Option Details
Menu To select the language of "Menu", "Subtitle" and
Subtitle "Audio" if more than one language are available on
Audio the disc.
E.B.L. To select On or Off for E.B.L. (Enhanced Black
Level).
Tv Screen To select a picture size according to the aspect
ratio of your TV.
Display To turn on or de-activate the operational status dis-
play on the screen.
Picture Mode To select a preferred picture mode from "Video",
"Film" or "Auto".
JPEG Interval To select a preferred setting for the slide show play-
back.
Dialogue To select On or Off for DRC (Dynamic Range Con-
trol).
QSound To select On or Off for QSound.
Password Input 4-digit password to set the parental level.
Parental To select a preferred parental level for the parental
setting.
Select Files To select a preferred file type for playing back a CD
containing a mixture of file types.
Output To select a preferred video output signal from "Pro-
gressive" or "Interlace".
56
Function setup (DVD)
Customizing the function settings (continued)
Setting details
Picture Mode
There are two types of source content in pictures
recorded in DVD video discs: film content (pictures
recorded from films at 24 frames per second) and
video content (video signals recorded at 30 frames per
second). Make this selection according to the type of
content being viewed.
Auto: Select this position normally.
The DVD player automatically detects
source content, film or video, of
playback source, and converts that
signal in the progressive output format
in an appropriate method.
Film: The DVD player converts film content
pictures in the progressive output
format appropriately. Suitable for
playback of film content pictures. The
progressive output feature will be most
effective under this selection.
Video: The DVD player filters video signal,
and converts it in the progressive
output format appropriately.
Suitable for playback of video content
pictures.
Note:
Depending on the disc, pictures may be cut off or
doubled. In this case, select "Video".
JPEG Interval
You can continuously play back all JPEG files automati-
cally.
After the setting below, start playing the disc on which
JPEG files have been recorded.
Off:
Plays back one file at a time.
5 Seconds:
Plays back images in the form of a slide show at
5 second intervals.
10 Seconds:
Plays back images in the form of a slide show at
10 second intervals.
15 Seconds:
Plays back images in the form of a slide show in
15 second intervals.
58
Page
57
58
59
Dialogue Off: DRC (Std)
QSound Off
/Setup/Return
Dialogue
DRC (Dynamic Range Control) enables you to control
the dynamic range so as to achieve a suitable sound for
your equipment.
On: DRC (TV):
Loud sound such as explosion or similar is toned
down slightly when played back. This makes it
suitable for when it is connected to a stereo.
Off: DRC (Std):
It plays back at the recording level on the disc.
Notes:
• This function works only during playback of Dolby Digital
recorded discs.
• The level of Dynamic Range Reduction may differ
depending on DVD video disc.
QSound
This DVD video player equipped with a "QSound". It can
produce the effect of being in a cinema or a concert hall.
On: The QSound operates.
Off: The QSound is disengaged.
Note:
The QSound setting can also be changed with AUDIO on
the remote control .
enu English
Subtitle English
Audio English
/Setup/Return
Menu, Subtitle, Audio
You can select the language of "Menu", "Subtitle" and
"Audio" if more than one languages are recorded onto
the disc.
English, Francais, Espanol:
The selected language will be heard or seen.
Other:
Other language can be selected (see the
"Language code list" ).
Original: (Audio)
The unit will select the first priority language of
each disc.
Off: (Subtitle)
Subtitles do not appear.
Notes:
• If the selected language is not recorded on the disc, the
first-priority language is selected.
• If you want to change the OSD language, you can perform
!
it by VCR MENU .
assword ----
arental Off
Select Files All
Output Interlace
/0Ð9/Enter/Clear/Setup/Return
Parental control setting
Some discs are specified not suitable for children. Such
discs can be limited not to play back with the unit.
1) Press C or D to select "Parental", then press B
or A until the level you require appears.
• Level Off: The parental control setting does not
function.
Level 8: All DVD software can be played back.
•
• Level 1: DVD software for adults cannot be
played back.
Select from the level 1 to level 8. The limitation will
be more severe as the level number is lower.
2) Press C or D to select "Password".
Press Number buttons (0–9) to input a 4-digit
password. Be sure to remember this number!
• If you input a wrong number, press CLEAR.
3) Press ENTER to store the password.
Note: Now the rating is locked and the setting can-
not be changed unless you enter the correct pass
word.
4) Press OPEN/CLOSE to activate Parental control
setting. (See "Temporary disabling of rating level by
DVD disc" .)
Notes:
• Depending on the discs, the unit cannot limit playback.
• Some discs may not be encoded with specific rating
level information though its disc jacket says "adult." For
those discs, the age restriction will not work.
To change the parental level
1) Press C or D to select "Password".
2) Press Number buttons (0–9) to enter the password
you have stored.
3) Press ENTER.
• The rating is now unlocked.
4) Press C or D to select "Parental", then press B
or A to change the parental level.
5) Press C or D to select "Password", then press
Number buttons (0–9) to enter the password.
Note: You can change the password if you want.
6) Press ENTER.
Now the parental level is changed and locked.
If you forget the password...
1. Press OPEN/CLOSE to open the disc tray.
2. Remove the disc.
3. Press OPEN/CLOSE again to close the disc tray.
"No Disc" appears on the screen.
E.B.L Off
Tv Screen 4:3
On
Display
Picture Mode Auto
JPEG Interval Off
/Setup/Return
E.B.L.
To select the black level of playback pictures, set your
preference and monitor's ability.
On: Enhanced grey scale (0 IRE cut off)
Off: Standard grey scale (7.5 IRE cut off)
Tv Screen
You have the following screen sizes to choose from:
4:3 (Letter box):
Select this mode when connecting to a conven
tional TV. When playing back a wide screen-DVD
disc, it displays the wide picture with black bands
at the top and bottom of screen.
4:3 (Pan scan):
It displays the wide picture on the whole screen
with left and right edges automatically cut off.
16:9 (Wide):
Select this mode when connecting to a wide-
screen TV. A wide screen picture is displayed full
size.
Press OPEN/CLOSE to view in the selected screen size.
Note:
If the DVD disc is not formatted in the pan & scan style, it
displays 4:3 style.
Display
On screen display can be switched on or off when you
press the buttons.
On: On screen displays appear when you press
the buttons (factory setting).
Off: On screen displays do not appear when you
press any buttons.
57
4. While holding 7 down on the remote control, press
STOP on the front panel. "PASSWORD CLEAR"
appears on the screen.
5. Enter a new password again.
Select Files
When playing back a CD containing a mixture of MP3,
WMA and JPEG files, only MP3/WMA or JPEG files can
be displayed on the file menu.
All:
Displays all files.
Music Only:
Displays only MP3/WMA files.
Pictures Only:
Displays only JPEG files.
Output
You can select the video output signal of the DVD
video player to the TV from "Interlace" or "Progres-
sive".
1) Press C or D to select "Output".
2) Press A, then press C or D to select "Interlace" or
"Progressive".
Interlace:
Select when connecting to a composite TV or
a TV equipped with component video inputs
but progressive scan is not compatible.
Progressive:
Select when connecting to a TV equipped
with component video inputs, progressive
scan compatible.
3) Press ENTER.
Warning:
Once "Progressive" is selected when connecting to a
TV progressive scan incompatible, no image will be
seen on the video display.
In this case, you must reset the unit by pressing STOP
on the front panel for five seconds. The video output
will be restored to "Interlace" setting, and a picture will
once again be seen on a conventional analog display.
Notes:
• Some discs may not be played back with the progressive
scanning mode correctly because of the disc characteris-
tics or recording condition.
• Once Progressive scan on, all other video outputs are
disabled except component video outputs.
Note:
If each setup (pages 57~59) has been completed, the unit
can always be worked under the same conditions (espe-
cially with DVD discs).
Each setup will be retained in the memory even if you turn
the power off.
59