When To Change The Filters - Riccar Radiance Owner's Manual

Maintenance and Care
When to change filters
The filters on your Radiance vacuum should
be replaced after 25 hours of operation. The
Radiance is equipped with a filter clock to
monitor the actual hours of operation and will
illuminate the change filter indicator light on
the nozzle of your vacuum when 25 hours of
operation have elapsed.
When the filters are replaced, reset the
filter clock (while the vacuum is running)
by removing cap and pressing the reset
button when replacing filter. The change filter
indicator light will once again only illuminate
after the next 25 hours of operation.
Replacing the HEPA exhaust filter
Note: Your vacuum is equipped with either
the standard S-Class HEPA filter or the
S-Class HEPA Plus filter. To avoid confusion
when purchasing your filter, the item
number is located on the side of the filter.
Please give this number to your Authorized
Retailer when purchasing filters or bring
your filter holder with you when
purchasing new filters.
• Access the filter by pressing down on the
release button located on top of the filter
holder.
• Remove the used filter and replace with a
new filter. Note: S-Class HEPA filters
cannot be washed and re-used.
20
Replacing the HEPA exhaust filter cont.
• Re-attach the exhaust filter holder to the
vacuum by aligning the slot at the base of the
filter holder with the clip on the vacuum and
press firmly into place.
Replacing the charcoal filter
• Open the bag compartment lid and locate the
charcoal filter on the left side of the compart-
ment.
• Using the latch on top, remove the
charcoal filter holder.
• Remove and throw away the used filter.
• Insert new charcoal filter and snap the char-
coal filter holder back into place.
• Close the bag compartment lid.
Maintenance and Care
21