Advertisement
Installing the Front Fork and Wheel
and Handlebar
• Keep children away while assembling.
• Insert the front fork and wheel tube into the front
steering hub of the bicycle frame so that the front fork
and wheel tube extends through the top of the front
steering hub. See Figure 2.
• With the small hexagonal screw facing toward the
front of the bike, slide the handlebar clamp over the
top of the front fork and wheel tube. See Figure 3.
NOTE: If needed, loosen the small hexagonal screw
with the 3mm Allen wrench in order to fit the clamp
over the tube.
• Firmly tighten the small hexagonal screw with the
3 mm Allen wrench. See Figure 4.
• With the notch facing forward, insert the handlebar
into the front fork and wheel tube to the desired height.
See Figure 5.
• Firmly tighten the large hexagonal screw with the
5 mm Allen wrench. See Figure 5.
• Pull on the handlebar to make sure it is secure.
WARNING
!
Make sure screws on handlebar clamp
are tightened securely.
Tire Pressure
Make sure the tires are inflated to 28 PSI.
WARNING
!
Check and adjust tire pressure
before riding.
Page 3
Figure 2
Figure 3
Figure 4
Figure 5
Bicycoo Instruction Manual
Advertisement
