Option Menu - Sharp Aquos LC-32L400X Operation Manual

H 4:3 mode
The WSS signal has 4:3 auto-switching that allows you
to select between Panorama and Normal.
Selected item
Panorama Wide image without side bars
Normal Normal range keeping 4:3 or 16:9 aspect
ratio
WSS signal 4:3 screen
4:3 mode "Panorama"
H Quick start
You can reduce the TV's start-up time after turning on
the power with the remote control unit.
Selected item
On The TV quickly starts up from standby,
8.5W or more of power consumption is
required during standby.
Off Power consumption is less than 1W.
H Text language
Select from among 3 kinds of language: West Europe,
Arabic, Farsi.
NOTE
• Teletext can display only when it is sent by a network. Not
used to convert between languages.
H Identification
You can check the current version of the software on the
screen.
H Reset
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
NOTE
• If you execute "Reset", all the settings such as Picture,
Audio and Programme will be reset to the factory preset
values.
14
Description
4:3 mode "Normal"
Description

Option menu

Option
Input select
PC audio select
Auto volume
Digital audio output
Audio only
4
Game play time
4
Colour system
4
Fine sync.
Version up
H Input select
For setting the signal type of external equipment.
Input source
INPUT2 Auto, S-VIDEO, VIDEO
H PC audio select
When using the INPUT5 terminal or HDMI1 terminal,
you must select which terminal uses the AUDIO (R/L)
jack for analogue audio input.
Selected item
HDMI1 When connecting devices (including a
PC) with DVI/HDMI cable to the INPUT1
terminal and inputting analogue audio
signals from the AUDIO (R/L) jack.
INPUT5 (RGB) When connecting a PC to the INPUT5
terminal, and inputting analogue audio
signals from the AUDIO (R/L) jack.
NOTE
• You must set this to "INPUT5(RGB)" when connecting devices
(including a PC) with an HDMI-certified cable to the INPUT 1
terminal. If "HDMI1" is set, there will be no sound output.
H Auto volume
Different sound sources, fairly often do not have the
same volume level, for example the changing from
movie to the advertisements. Auto volume solves this
problem and equalises the volume levels. (On, Off)
H Digital audio output
This function allows you to select your favourite audio
output system.
Selected item
PCM The optical output format is normally in
PCM.
Dolby Digital
Dolby Digital audio will be output when
there is a Dolby Digital audio signal.
The output will be in PCM when there
is no Dolby Digital audio signal.
Digital setup
[HDMI1]
[On]
[PCM]
Selectable item
Description
Description