InFocus LitePro 560 User Manual page 16

Setting Up the LitePro
power switch
Figure 5. Connecting a Macintosh desktop computer
8
•
If you have a Macintosh desktop computer with a separate
attach one of the Mac adapters to the "VGA" end of
monitor,
the LitePro cable. Then plug the Mac adapter into the monitor
connector on the computer.
If you want to display your presentation on your monitor as
well as on the projection screen, attach the "Monitor" end of
the LitePro cable to the other Mac adapter. Then connect the
Mac adapter to the end of the monitor cable as shown below.
"Monitor" end of Mac adapter
LitePro cable
monitor cable Mac adapter
LitePro 560/570 User's Guide
"VGA" end of
LitePro cable