Safety Information - Booster BMTV-9980DVUSBT Installation & Owner's Manual

BMTV-9980DVUSBT

SAFETY INFORMATION

PLEASE READ COMPLETELY AND BECOME FAMILIAR WITH THE CONTENTS
OF THIS MANUAL BEFORE INSTALLATION AND OPERATION OF THIS UNIT,
AND KEEP IT CAREFULLY FOR FUTURE REFERENCE.
This unit is a class 1 laser product. The laser beam may cause hazardous
radiation if exposure to laser system directly. Do not attempt to disassemble
the unit personally.
This unit has been designed and manufactured to assure personal safety. Improper
use can result in electric shock or fire hazard. The safeguards incorporated in this
unit protect you if you observe the following procedures for installation, use and
servicing. This unit doesn't contain any parts that can be repaired by the user. If the
unit requires maintenance, contact an authorized service center.
Warnings
1. Do not expose the product to rain, water or excessive moisture. This could
cause electrical shorts, fire or other damage.
2. This product is designed to operate with a 12 volt DC, negative ground
battery system. Use the proper power supply.
3. The monitor is operated automatically. Do not push in or pull out the monitor
or try to reverse the monitor manually! Do not attempt to adjust the monitor
angle upward or downward manually. It will cause damage to the Monitor
Mechanism Structure.
4. Do not impact the monitor with a hard object. It may cause permanent damage.
5. Do ground all equipments and works in order to avoid causing damage to the
unit by electrostatic discharges.
6. The user who handles this product takes all necessary precautions to avoid
ESD (Electro-Static Discharge) failures.
7. Do not attempt to install or service your unit by yourself. Installation or servicing
of the unit by persons without training and experience in electronic equipment
and automotive accessories may be dangerous and could expose you to the
risk of electric shock or other hazards.
- 2 -