Setup Menu - Samsung PN51E530 User Manual

To change the information, follow these steps:
1 . Select the Programmed List icon on the left side of the
Channel List screen, and then press the ENTER
C3'
button.
2. On the Programmed List screen, select the show or channel
entry you want to change, and then press the TOOLS button.
The Tools Menu appears.
3. Select Change Info, and then press the ENTER C3' button.
The Time Viewing screen appears.
4. Use the
~~~
buttons to move from entry field to entry field
and the ._/'f buttons to change the entries. Where numbers
are displayed, you can also enter numbers directly using the
number keypad on your remote.
5. Press the ENTER
[31
button when done.
• Cancel Schedules: Cancel a show or channel you have
scheduled.
To cancel a scheduled show or channel, follow these steps:
1 . Select the Programmed List icon on the left side of the
Channel List screen, and then press the ENTER
C3'
button.
2. On the Programmed List screen, select the show or channel
entry you want to cancel, and then press the TOOLS button.
The Tools Menu appears.
3. Select Cancel Schedules, and then press the ENTER
C3'
button. The Cancel Schedule screen appears.
4. Select OK, and then press the ENTER
[31
button.
• Information: Display the information for a show or channel you
have scheduled. You can also change the schedule Information.
1 . Select the Programmed List icon on the left side of the
Channel List screen, and then press the ENTER C3' button.
2. On the Programmed List screen, select the show or channel
entry you want information for, and then press the TOOLS
button. The Tools Menu appears.
3. Select Information, and then press the ENTER
C3'
button.
The Time Viewing Information screen appears.
4. Select Change Info and press the ENTER
G
button
to change information, or select Close and press the
ENTER
[31
button to close the Information screen.
• Select All I Deselect All: You can select or deselect all
channels in the channel list.
0 Other Channel Menu Functions
Channel Mode (Added Channels/Favorite
Channels}
Lets you select the channel list displayed when you press the
1\CHV(Channel) button on your remote. For example, if you
select Favorite Channels, you will only see Favorite channels when
you press the 1\CHV button.
Fine Tune
Analog channels only.
If the reception is clear, you do not have to fine tune the channel,
as this is done automatically during the search and store
operation. If the signal is weak or distorted, fine tune the channel
manually.
Select the channel, and then select Fine Tune.
1.
Fine tuned channels that have been saved are marked with
an asterisk"*" on the right-hand side of the channel number
in the channel banner.
~:L
To reset fine-tuning, select the channel, select Fine Tune, and
then select Reset on the Fine Tune screen.
-6-
Setup Menu
Plug & Play
Lets you re-run the Plug
&
Play initial setup procedure. For
instructions, see your Quick Start Guide.
Language
Set the menu language.
~
Choose between English, Espaiiol, and Fran<;ais.
0 Setting the Time
Time
~
The time you set will appear when you press the INFO
button.
Ill
• Clock: Set the clock so you can use the various timer features
of the 1V.
~
If you disconnect the power cord, you have to set the
clock again.
To set the clock, follow these steps:
1 . Select Setup >Time > Clock.
2. Press ENTER
G
and select Auto or Manual, and then press
ENTER
C3'
again.
If you selected Auto:
The 1V will automatically download the correct time from a
digital channel.
• Select Time Zone, and then press the ENTER
[31
button.
Use the•/'f buttons to select your Time Zone, and then
press ENTER G.
• Select DST (Daylight Savings Time), and then press
ENTER
[31.
Select On if you want to turn the DST
adjustment on and off manually. Select Off to turn off the
DST adjustment. Select Auto if you want the 1V to adjust
to DST automatically. Press ENTER
[31
when done.
~
DST and Time Zone function are only available when
the Clock Mode is set to Auto.
If you selected Manual:
The Clock Set screen appears. Use the ._I 'f buttons to
change the values in each field or use the number buttons to
enter the values directly. Use the
~~~
buttons to move from
field to field. When done with all the fields, press ENTER G.
~1:.
Available only when Clock Mode is set to Manual.
• Sleep Timer
B!lil
Automatically shuts off the 1V after a preset period of time. (30,
60, 90, 120, 150 and 180 minutes).
~
To cancel the Sleep Timer, select Off.
Timer 1 I Timer 2 I Timer 3
Turns the 1V on and off automatically at times and days you
select. You can set three different on/off timer settings.
l:l',r,
You must set the clock first.
• On Time I Oft Time: Set the hour, minute, am/pm, and
Activate/Inactivate fields for the On Time and Off Time. Use the
~~~ buttons to move from field to field. Use the •t'f buttons
to change the values in each field. To activate the timer with
the setting you have chosen, set the Activate/Inactivate field to
Activate.
• Volume: Set the desired loudness.