USE OF REMOTE CONTROL (Cont.)
TIMER ON FUNCTION ( Off → Start Operation )
TIMER ON function is useful when you want to start automatically the air conditioner at a desired setting time
when you wake up in the morning or when you return home.
Off
Example:
To automatically start the air conditioner at 6:00 in the morning
Proceed with following steps :
(1)
Press TIMER button until the remote control display shows.
TIMER ON indicator and the last setting time which is flashing.
Now it is ready to reset the setting time of TIMER ON function.
(2)
To set the desired time, Press TEMP. button
or
(Backward) unit the time 6:00 is displayed.
Each time you press there the button, the time moves forward
or backward by 10 minutes depending on which one you
press. The time alters as quickly as you press the button.
(3)
After setting the time for TIMER ON function,
the TIMER led
on the display panel of the indoor unit.
TO CANCEL TIMER ON FUNCTION
Press CANCEL button if you want to cancel
TIMER ON setting.
TO CHANGE TIMER ON SETTING
Perform steps 1, 2 and 3 to change TIMER ON setting.
CAUTION
When you select the timer operation, the remote control
automatically transmits the timer signal to the indoor
unit at the specified time. Therefore, keep the remote
control in a location from which it can transmit the
signal to the indoor unit properly.
The effective operation time set by remote control is
limited in 24 hours.
Start
( 18 )
TIMER
will illuminate
(Forward)