NETGEAR DG834 Reference Manual page 63

Table 5-1. Menu 3.2 - Modem Router Status Fields
Field
Account Name
Firmware Version
ADSL Port
MAC Address
IP Address
Network Type
IP Subnet Mask
Domain Name Server (DNS) Displays the DNS Server IP addresses being used by the modem router.
LAN Port
MAC Address
IP Address
DHCP
IP Subnet Mask
Modem
ADSL Firmware Version
Modem Status
Downstream Speed
Upstream Speed
VPI
VCI
Managing Your Network
Reference Manual for the ADSL Modem Router DG834
Description
The Host Name assigned to the modem router in the Basic Settings
menu.
Displays the modem router firmware version.
These parameters apply to the Internet (ADSL) port of the modem router.
Displays the Ethernet MAC address being used by the Internet (ADSL)
port of the modem router.
Displays the IP address being used by the Internet (ADSL) port of the
modem router. If no address is shown, the modem router cannot connect
to the Internet.
The network type depends on your ISP.
This field displays the IP Subnet Mask being used by the Internet (ADSL)
port of the modem router.
These addresses are usually obtained dynamically from the ISP.
These parameters apply to the Local (ADSL) port of the modem router.
Displays the Ethernet MAC address being used by the Local (LAN) port
of the modem router.
Displays the IP address being used by the Local (LAN) port of the
modem router. The default is 192.168.0.1.
If OFF, the modem router will not assign IP addresses to PCs on the
LAN.
If ON, the modem router will assign IP addresses to PCs on the LAN.
Displays the IP Subnet Mask being used by the Local (LAN) port of the
modem router. The default is 255.255.255.0.
These parameters apply to the Local (WAN) port of the modem router.
The version of the firmware.
The connection status of the modem.
The speed at which the modem is receiving data from the ADSL line.
The speed at which the modem is transmitting data to the ADSL line.
The Virtual Path Identifier setting.
The Virtual Channel Identifier setting.
v2.3, May 2007
5-5