NETGEAR DG834 Reference Manual page 163

a. In Step 1, enter toDG834 for the Connection Name.
b. In Step 2, enter dg834.dyndns.org for the remote WAN's IP address.
c. In Step 3, enter the following:
• IP Address = 10.5.6.1
• Subnet Mask = 255.255.255.0
7. Test the VPN tunnel by pinging the remote network from a PC attached to the DG834 v3.
a. Open the command prompt (Start -> Run -> cmd)
b. ping 172.23.9.1
Figure B-11
Note: The pings may fail the first time. If this happens, try the pings a second
NETGEAR VPN Configuration
Reference Manual for the ADSL Modem Router DG834
time.
v2.3, May 2007
B-13