NETGEAR DG834 Reference Manual page 29

b. Connect the Ethernet cable (D) from a modem router LAN port to the Ethernet adapter in
your computer.
D
Figure 3-6
c. Connect the power adapter to the firewall and plug it in to a power outlet. Verify the
following:
The power light is lit after turning on the firewall.
The test light comes on briefly, then goes off.
The ADSL light is green, indicating you are connected to the ADSL network.
d. Now, turn on your computer. If software usually logs you in to your Internet connection,
do not run that software. Cancel it if it starts automatically. Verify the following:
The local lights are lit for any connected computers.
3. Log in to the modem router.
Note: Your computer needs to be configured for DHCP. For instructions on
configuring for DHCP, please see the documentation that came with your
computer or
Configuring Your Internet Connection
Reference Manual for the ADSL Modem Router DG834
"Preparing a Computer for Network Access:" in Appendix
v2.3, May 2007
C.
3-7