NETGEAR DG834 Reference Manual page 50

Reference Manual for the ADSL Modem Router DG834
• Service
From this list, select the application or service to be allowed or blocked. The list already
displays many common services, but you are not limited to these choices. Use the Services
menu to add any additional services or applications that do not already appear.
• Action
Choose how you want this type of traffic to be handled. You can block or allow always, or you
can choose to block or allow according to the schedule you have defined in the Schedule
menu.
• Send to LAN Server
Enter the IP address of the computer or server on your LAN which will receive the inbound
traffic covered by this rule.
• WAN Users
These settings determine which packets are covered by the rule, based on their source (WAN)
IP address. Select the desired option:
– Any — all IP addresses are covered by this rule.
– Address range — if this option is selected, you must enter the Start and Finish fields.
– Single address — enter the required address in the Start field.
• Log
You can select whether the traffic will be logged. The choices are:
– Never — no log entries will be made for this service.
– Always — any traffic for this service type will be logged.
– Match — traffic of this type which matches the parameters and action will be logged.
– Not match — traffic of this type which does not match the parameters and action will be
logged.
4-8
v2.3, May 2007
Protecting Your Network