Removing Propeller; Installing Propeller - Yamaha F9.9F Owner's Manual

Check the propeller shaft oil seal for dam-
G
age.
EMU30662

Removing propeller

EMU29197
Spline models
1. Straighten the cotter pin and pull it out us-
ing a pair of pliers.
2. Remove the propeller nut, washer, and
spacer (if equipped). WARNING! Do not
use your hand to hold the propeller
when loosening the propeller nut.
[EWM01890]
1. Cotter pin
2. Propeller nut
3. Washer
4. Propeller
5. Thrust washer
3. Remove the
equipped), and thrust washer.
EMU29215
Dual thrust models
1. Straighten the cotter pin and pull it out us-
ing a pair of pliers.
propeller, washer
1. Cotter pin
2. Propeller nut
3. Washer
4. Deflector
5. Propeller
6. Thrust washer
2. Remove the propeller nut and washer.
WARNING! Do not use your hand to
hold the propeller when loosening the
propeller nut.
3. Remove the deflector, propeller, washer
(if equipped), and thrust washer.
EMU30672

Installing propeller

EMU29234
Spline models
ECM00501
NOTICE
Make sure to use a new cotter pin and
(if
bend the ends over securely. Otherwise,
the propeller could come off during opera-
tion and be lost.
1. Apply Yamaha marine grease or a corro-
sion resistant grease to the propeller
shaft.
2. Install the spacer (if equipped), thrust
washer, washer (if equipped), and pro-
peller on the propeller shaft. NOTICE:
Make sure to install the thrust washer
before installing the propeller. Other-
wise, the lower case and propeller
boss could be damaged.
Maintenance
[EWM01890]
[ECM01881]
65