Downloading A New Flash - TotalFlow XSeries User Manual

Downloading a New Flash

The occasion may arise that new software be downloaded to the XRC Flash Memory. As
some flash files require the unit to be "Cold Started", technician should take precaution to
collect data and perform a "Save and Restore" backup.
Instructions
Step
10.
11.
1. Connect the PCCU cable to the device.
2. In Windows, Click Start, select Programs, Totalflow PCCU32
folder and then Flash Loader. The Flash Loader program will
start.
3. Enter the path and file name or click the browse [...] button to
locate the flash file.
4. Select X-Series for the Device type.
5. Select the correct computer Com Port.
6. Verify that Program Flash is displayed for the Mode option.
7. Although the Block size can be selected, the default size of 512
is recommended.
8. Click the Next button to see the following screen:
9. Click the Start Download button. As the program sequences
through the steps, it will provide the status in the Current Status
window and check off the three sequences shown above the
Start Download button as they complete. During the download,
a progress bar plus the number of bytes downloaded is
continually updated. During the download sequence an Abort
button replaces the Start Button, but would typically only be
used if the user realized he/she had selected the wrong file.
After a successful download, a dialog box will appear, plus the
device will commence checksum verification and then start-up.
Acknowledge the dialog box by clicking the OK button.
Click the Close button to close the Flash Loader program.
Procedure
4-3