TotalFlow XSeries User Manual page 190

ARRAY.REGISTER
3.101 Month Accum Energy
Month Accum Energy, Not Reset by Reset
3.102
Vol
3.103 Fixed Ap
3.104 Current Flow Rate
3.105 Previous Month Accumulated Volume
3.106 Previous Month Accumulated Volume not
affected by reset volume command
3.107 Previous Month Energy
3.108 Previous Month Energy not affected by
reset volume command
3.109 Reserved for Selectable Units
3.110 Reserved for Selectable Units
3.111 Reserved for Selectable Units
3.112 Reserved for Selectable Units
3.113 Reserved for Selectable Units
3.114 Reserved for Selectable Units
Tube Floating Point Register Notes:
1.
Static pressure values are in psia or psig depending on gauge pressure device selection. See
Tube Byte Register 0.55.
2.
Flow Rate Limits units depend on Flow rate / volume scale flags. See Tube Byte Register 0.42.
Tube register cross references are structures containing the register access values for data
used by the tube but owned by another application. The following structure defines data
type Register.
typedef struct {
byte app;
byte array;
int16 index;
} Register;
ARRAY.REGISTER
4.0 AP Register
4.1 DP Register
4.2 TF Register
4.3 PI Register
4.4 RS Register
4.5 AC 1 Register
4.6 AC 1 DI Register
4.7 AC 2 Register
4.8 AC 2 DI Register
A-74
DESCRIPTION
Tube Register Cross References
// Register Struct
// Application
// Register array
// index into array
DESCRIPTION
FORMAT USAGE
MMBTU Read Only
MMBUT Read Only
Read/Write
Read Only
Read Only
Read Only
Read Only
Read Only
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
NOTE
TYPE
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write