TotalFlow XSeries User Manual page 195

The following register tables describe registers unique to AGA-3 measurement tubes.
ARRAY.REGISTER
6.0 1985 Static Factor Select Bits
6.1 Misc Select Bits
6.2 Vol - Flow Rate unit selection for volume
6.3 Vol - Flow Rate unit selection for flow rate
6.4 Auto Fb Calc
AGA-3 Byte Register Usage Notes:
1.
AGA-3 1985 Static Factor Select Bits –
0x01, 1 /* Use Fpb
0x02, 2 /* Use Ftb
0x04, 4 /* Use Fg
0x08, 8 /* Use Fb
0x10, 16 /* Use Fws (Faux:well stream) */
0x20, 32 /* Static Pressure Tap is Upstream */
0x40, 64 /* Supports switchable characteristics, this bit not writable*/
2.
AGA-3 Misc Select Bits –
0x01, 1
0x02, 2
0x04, 4
0x08, 8
0x10, 10 /* Orifice Plate type
0x20, 20 /* Use Live Analyzer Data in volume calc */
0x40, 40 /* Use Fixed Ax data on analyzer error */
0x80, 80 /* reserved */
3.
Vol - Flow Rate unit selection for volume
0 = MCF
1 = MMCF
4.
Vol - Flow Rate unit selection for flow rate
0 = per hour,
if Vol - Flow Rate unit selection for volume = 0, rate will be SCF/HOUR;
if Vol - Flow Rate unit selection for volume = 1, rate will be MCF/HOUR.
1 = per day,
if Vol - Flow Rate unit selection for volume = 0, rate will be MCF/DAY;
if Vol - Flow Rate unit selection for volume = 1, rate will be MMCF/DAY.
5.
For AGA-3 1985
ARRAY.REGISTER
7.0 Current DP / cal checks
7.1 DP High Limit
7.2 DP Low Limit
7.3 DP Zero CutOff
AGA-3 Tube Registers
DESCRIPTION
*/
*/
*/
*/
/* RTD Installed
/* Use RTD in calcs
/* Reserved */
/* Check Security Code */
*/
AGA-3 Float Registers
DESCRIPTION
*/
*/
TYPE NOTE
Read/Write 1
Read/Write 2
Read/Write 3
Read/Write 4
Read/Write 5
TYPE NOTE
Read/Write
Read/Write
Read/Write
Read/Write
A-79