Emergency Function & Auto-Restart Function - Celiera DUCTLESS MINI SPLIT AIR CONDITIONING SYSTEMS Instruction & Installation Manual

EMERGENCY FUNCTION AND AUTO-RESTART FUNCTION
AUTO-RESTART FUNCTION
The appliance comes equipped with a preset Auto-
Restart function by the manufacturer. Using this
function, the air conditioner can keep the selected
settings after a blackout or a voltage drop.
To deactivate the Auto-Restart function, perform the
following:
1. Switch the air conditioner off and unplug it.
2. Press and hold the emergency button while
while plugging it back in.
3. Keep pressing the emergency button for at least
10 seconds until you hear four short beeps from
the unit. The Auto-Restart function is now off.
To re-activate the Auto-Restart function, follow the
same procedure until you hear three short beeps
from the unit.
EMERGENCY FUNCTION
If the remote control is lost, perform the
following:
Lift the unit's front panel to reach the
air conditioner's emergency button.
1. Press once and you will hear one beep.
The system will operate in forced cool
mode.
2. Press twice and you will hear two beeps.
The system will operate in forced heat
mode. (NOTE: Heating function not
available on all models.)
3. To switch off the unit, press the
emergency button one more time and
you will hear one long beep. After 30
minutes in a forced function mode, the
system will automatically begin working
in FEEL mode. The FEEL function is
described on page 13 of this manual.
The shape and position of the emergency button
may vary according to the model, but their function
will be the same.
Note: the external static pressure of heat pumps (on select models) is 0 Pa for all models.
Emergency
Button
Note: Displays shown are for reference only and may not re ect
the actual product.
Display PCB
5
Emergency
Button
Emergency
Button
In some models, the
emergency button will be
on the right side of the unit
under the front panel.
Front
Panel