Table of Contents
Advertisement
MODES OF OPERATION
This air conditioner is designed to create a comfortable
climate for individuals in the affected room.
All models can cool and dehumidify the air completely
automatically and some models can also provide heat
using either a heat pump or electric heat.
Air pulled by the fan enters through the grill of the front
panel and passes through the filter, which traps dust
inside. Air is then sent to the heat exchanger and is
cooled, dehumidifed, or re-heated by the heat
exchanger.
Heat removed from the air is then sent outside.
When the cycle is finished, the fan sends the freshened
air back into the room. The direction of the air outlet is
regulated by the flaps, which are motorized to move up
and down as well as left and right by the vertical
deflectors.
'SWING' CONTROL OF AIR FLOW
• The air flow from the outlet is uniformly
A IR
S WING
distributed throughout the room.
• Air can be directed in a particular
way for optimum effect.
The SWING button on the remote controls the position
of the flaps, causing air to be directed up or down.
For best results and to guarantee even diffusion of air
in the room, use the follwing tips:
• In cooling mode, orient the flaps horizontally or
slightly upward
• In heating mode (if applicable), orient the flaps
downward, as warm air will always tend to rise
upward.
Vertical deflectors can be positioned manually and are
located under the flaps. By adjusting these, air can
be directed to flow to the right or to the left.
Manual adjustment of the deflectors must be done
with the unit switched off.
CAUTION: Never position the flaps manually; the
control mechanism is delicate and can be seriously
damaged.
DANGER: Never insert your hand or any objects into
the air outlet of the units - all units contain a fan that
operates at high speed.
Heat
Exchanger
'Flap'
Movement
9
Filter
Fan
Deflectors
'Flaps'
Hide quick links:
Advertisement
Table of Contents
