Functional Description; Intended Use; Product Features - Bosch 7-100 Original Instructions Manual

OBJ_BUCH-952-002.book Page 26 Wednesday, October 14, 2009 1:34 PM
26 | English

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.

Intended Use

The machine is intended for cutting, roughing,
and brushing metal and stone materials without
using water.
For cutting metal, a special protection guard for
cutting (accessory) must be used.
For cutting stone, a special extraction hood for
cutting with cutting guide (accessory) must be
used.
With approved sanding tools, the machine can
be used for sanding with sanding discs.

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Spindle lock button
2 On/Off switch
3 Allen key
4 Thumbwheel for speed preselection
(GWS 7-115 E)
5 Auxiliary handle
6 Grinder spindle
7 Locking screw for protection guard
8 Protection guard for grinding
9 Mounting flange with O-ring
10 Grinding/cutting disc*
11 Clamping nut
12 Quick-clamping nut
13 Protection guard for cutting*
14 Carbide grinding head*
15 Hand guard*
16 Rubber sanding plate*
17 Sanding sheet*
1 619 P07 577 | (14.10.09)
18 Round nut*
19 Cup brush*
20 Cutting guide with dust extraction protec-
tion guard *
21 Diamond cutting disc*
22 Handle (insulated gripping surface)
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
*
Bosch Power Tools