Wireless Access Control - Tenda 3G611R+ User Manual

3G 11N Wireless Router
address into each own AP MAC address table by manual
or scanner to enlarge and extend the wireless radio.
Encrypt Type : Select one from WEP, TKIP, AES for
security here.
Pass ph rase: Enter the encrypted key for wireless
devices.
AP MAC Address: Input the MAC address of an other
(opposing) wireless router you want to connect.
NOTE: It is recommended that two wireless
routers keep the same bandwidth, channel
number, and security settings. Apply the settings
a nd reboot the Router to activate it.

7.6 Wireless Access Control

To secure your wireless LAN, the wireless access control
is actually based on the MAC address management to
allow or block the specific clients to access the wireless
network. Select "Wireless Set ting->Access Control" to
d isplay the following screen:
55