Tenda 3G611R+ User Manual page 65

Internal Port: This is the port number of LAN

computer set by the Router. The Internet traffic
from the external port will forward to the internal
port. For example：you can set the internal port
NO.66 to act as the external port NO.21 for ftp
service.
IP Address: Enter the IP address of the PC where

you want to set the applications.
Protocol: Select the protocol (TCP/UDP/Both) for

the application.
Delete/Enable: Click to check it for corresponding

operation.
Well-Known Service Port: Select the well-known

services as DNS, FTP from the drop-down menu to
add to the configured one above.
Add: Add the selected well-known port to the

policy ID.
For example:
You can establish a WEB server at the computer with the
IP address of 192.168.0.10 in LAN and the server use
the port of 80. If you can visit the WEB server in WAN
when you enter http://x.x.x.x:40, you can enter 40 at
the "WAN Ports "on this page and enter 80 at the "LAN
Ports". "LAN IP" set 192.168.0.10. "Protocol" selects all.
It takes effect after saving the settings.
3G 11N Wireless Router
60