Wireless Access Control - Tenda 3G611R+ User Manual

Bridge Mode: You can wirelessly connect two or more
wired networks via this mode. In this mode, you need
to add the Wireless MAC address of the connecting
device into the Router's AP MAC address table or
select one from the scanning table.
Repeater Mode ： In this mode, add the opposing
MAC address into each own AP MAC address table by
manual or scanner to enlarge and extend the wireless
radio.
Encrypt Type: Select one from WEP, TKIP, AES for
security here.
Pass phrase: Enter the encrypted key for wireless
devices.
AP MAC Address: Input the MAC address of another
(opposing) wireless router you want to connect.
NOTE: It is recommended that two wireless
routers keep the same bandwidth, channel
number, and security settings. Apply the
settings and reboot the Router to activate it.

7.6 Wireless Access Control

To secure your wireless LAN, the wireless access
control is actually based on the MAC address
management to allow or block the specific clients to
access the wireless network. Select "Wireless Setting-
>Access Control" to display the following screen: