Hardware Installation
SY-KT600 DRAGON Plus
Step 2 Install Memory Module
ON
Your board comes with three DIMM sockets, providing support for up to
3GB of main memory using unbuffered (non-registered) and non-ECC
DIMM modules from 128MB to 1GB. On this motherboard, DRAM speed
can be set independent from the CPU front side bus speed. Depending on the
DRAM clock speed setting in the BIOS setup, appropriate memory modules
must be used. For 100MHz DRAM speed, use PC1600 memory; for
133MHz DRAM speed, use PC2100 memory; for 166MHz DRAM speed,
use PC2700 memory, for 200MHz DRAM speed use PC3200 memory.
Memory Configuration Table
Number of Memory
DIMM 1
DIMM 2
DIMM 3
Modules
DDR RAM PC2100/PC2700/PC3200
RAM Type
(non-register & ECC)
Memory Module Size
64 / 128 / 256 / 512 / 1024 MB
(MB)
22