Timer Dial; Thermostat Dial; Drying Time Control; Door Control - Tecnik TKL 9290 Instruction Manual

CONTROL PANEL

TIMER DIAL

Used to select the wash cycles and to display them during operation. To
select the cycles, turn the dial clockwise until the mark coincides with
the seleceted cycle.
WARNING: Do not turn the timer dial while the machine is energized.
Do not turn the timer dial counterclockwise.

THERMOSTAT DIAL

To set the temperature, turn the dial until the mark coincides with the
selected temperature. It is used to regulate the washing temperature
from 30° C to 95° C based on the selected wash cycle and the type of
fabric to be washed. It is rscommendet to follow the wash cycle table.
By turning the dial to this symbol ❄ the machine will perform acold wash
cycle, which is particularly indicated for delicate temperature-sensitive
fabrics.

DRYING TIME CONTROL

Enables you to select the drying time and temperature. When set on the
right-hand side, the drying cycle will be executed at a high temperature
with a maximum programmable temperature of over 130 min (for drying
cotton and linen) while, when set on the left, the drying cycle will be exe-
cuted at a low temperature with a maximum time of 90 minutes (for dry-
ing synthetics and delicate fabrics).
To set the drying timer, turn the control clockwise so that the reference
mark is aligned with the selected drying time (The "drying program"
table contains instructions on how to choose the times, according to
your machine's spin-drying speed, the fabric to be dried and the degree
of dryness)
WARNING: Do not turn the timer control anticlockwise.
DOOR
Use the handle to open the door.
During the wash and dry cycle, a special safety device keeps the door
locked.
To open the door, turn off the machine using the ON-OFF push-button
and wait about 30 seconds after the switching offthe warning light befo-
re turning the handle to open the door.