Tecnik TKL 9290 Instruction Manual page 13

— Make holes on the wooden door according
to the instructions overleaf.
— take hinges (A) out of the bag and fix them
to the door.
— Take jack (B); its support (C) and fix one to
the other by means of screws (G).
— Install hinges (A), jack (B) and separator
(E) to the door.
— Fix stopping hook (D) to front panel of the
washing machine by means of screws (F).
— Insert caps (H) into the holes, as shown in
the figure.
— Make holes into the base and fix magnets
(L).
DOOR OPENING REVERSAL
To open the door from left to right, follow the instructions by turning the position of the holes.
If the machine is to be fitted underneath a worksurface and the distance that the appliance
needs to be raised is greater than 10 mm, then a solid one-piece baseboard should be used.
(Not supplied)