Power Indicator; Spin Selection Button; Control Panel - Tecnik TKL 9290 Instruction Manual

Washer dryer
Table of Contents

Advertisement

CONTROL PANEL

To become familiar with your machine functions, compare the symbols on the control panel
with those described below.
ON/OFF
By pressing this button the machine turns on and executes the set wash cycle. It is
used to turn the washing-dryer on and off.

POWER INDICATOR

when lit it indicates that the washer-dryer is electrically energized
HALF-LOAD/DRYING
This key has two functions :
WASHING (HALF-LOAD) It reduces the amount of water loaded during both wash-
ing and rising, thus providing a considerable saving in the consumption of water,
electricity and washing powder.
Use in cotton and linen cycles for washing a limited amount of dry clothes (MAX 2.5kg)
DRYING: It must always be pressed for the drying cycle to be executed.
STOP WITH WATER IN THE TANK
Can be used on the wool and delicate fabric cycle.
The machine stops before draining the water, leaving the clothes to soak.
To drain the water and execute a short spin-dry cycle, release the key.
To drain the water only, turn the timer control to the drainage cycle (see the cycle table)
Always set the programme with the machine switched off.
In both cases, the machine ends the cycle automatically.

SPIN SELECTION BUTTON

By pushing this button the machine will perform the final spin at the maximum spin
800
speed setting ( i.e. 1200 ).
1200
It is used for resistant fabrics so that there will be less water in the wash at the end
of the spin cycle.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents