Before a self-cleaning cycle
Remove the racks. Leaving the
oven racks in the oven during a
self-cleaning cycle will discolor the
oven racks and make them difficult
to slide in and out of position.
•
Make sure the door lock feature is
turned off and the oven is cool. If
they are not, the self-cleaning cycle
will not start.
•
Make sure the warming drawer is
turned off. Self-clean will not start
when the drawer is on.
Do NOT use the surface burners while the oven is operating in the self clean
mode.
WARNING
Before a self-cleaning, check whether the door is locked.
•
A blinking Lock icon indicates the oven door is in the
process of being locked.
•
When the Lock icon is on, the oven door is locked.
•
When Loc is shown in the display, it indicates the door
lock feature is on. Press and hold the START/SET pad
for 3 seconds to unlock the oven controls.
130603_(IB)NX58F5700WS_AA_DG68-00517A_EN+CFR.indb 71
maintaining your appliance _71
03/06/2013 20:48:34