LG CRD-8481B Owner's Manual page 6

Front View
1 . Disc Drawer
Accepts a CD-ROM disc on its tray.
2 . Busy Indicator
The Busy Indicator lights during initialization and data-read operations.
3 . Emergency Eject Hole
Insert a paper clip here to eject the drawer manually or when there is no
power.
4 . Open/Close/Stop Button
This button is pressed to open or close the CD tray.
If an audio CD is playing, pressing this button will stop it, and pressing it
again will open the tray.
Back View
1 . Digital Audio Output Connector
This is a digital audio output or Video CD output connector.
You can connect this to a digital audio system or a Video CD Board.
2 . Analog Audio Output Connector
The Audio Output Connector connects to a sound card.
3 . Master/Slave/CSEL Jumper
These three jumpers are used to set the CD-ROM Drive to either a Master,
Slave, or CSEL device.
4 . Interface Connector
This 40-pin connector is used to transfer data and control signals between the
C D-ROM Drive and your PC.
5 . Power-in Connector
Attach a power cable from the computer to this connector.
E-6