Brookstone SMARTSET Instructions Manual page 4

291070_INS_SmartsetCloRad NEWT
CAUTION
• TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
• TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
• TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR
BACK. THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrow-head symbol within an equilateral
triangle is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the product.
4
10/3/02 9:38 AM Page 7
5. To stop the radio sooner, press either ALARM 1 or ALARM 2, or press RADIO
ON/OFF. The radio will stop, but the alarm remains set and will turn the
radio on again at the same time on the following day (depending on the
Alarm Mode setting).
6. If you do not want the alarm to turn the radio on the following day, set the
appropriate Alarm selector to the 'Off' position.
Snooze Alarm
After the radio or buzzer alarm sounds, you may press SNOOZE for a few more
minutes' sleep. The alarm will stop for approximately nine minutes and then
turn on again. You may repeat SNOOZE up to seven times if desired, but after
the seventh time, the alarm will not turn on again.
Sleep to Music Timer
You can program the sleep timer to play the radio for up to 90 minutes and
then shut off automatically.
1. Press SLEEP ON. The display will briefly show "10" and the radio will begin
to play. After 10 minutes the radio will shut off automatically. Each time
you press SLEEP ON the sleep timer will start at 10 minutes. This is the
sleep timer's default setting.
2. To increase or decrease the amount of time that the radio will play before
shutting off, hold SLEEP ON and press either UP or DOWN to change the
display to the desired sleep time, up to a maximum of 90 minutes or a
minimum of two minutes.
21