Pride Jazzy 600 2S Owner's Manual page 19

I I I .
Controller Connector: This is where the controller connects to the power module or power base. Each controller uses a
different type of cable. Regardless of which type of controller is used, the cable must be secured to the seat assembly and
not allowed to drag on the floor.
Main Circuit Breaker: The main circuit breaker is a safety feature built into your power chair. When the batteries and the
motors are heavily strained (e.g., from excessive loads), the main circuit breaker trips to prevent damage to the motors and
the electronics. If the circuit trips, allow your power chair to "rest" for approximately one minute. Next, push in the circuit
breaker button, turn on the controller, and continue normal operation. If the main circuit breaker continues to trip repeat-
edly, contact your authorized Pride Provider.
POWER MODULE
BATTERY
CONNECTOR
MOTOR
CONNECTORS
ONBOARD
BATTERY
CHARGER
CHARGER POWER
CORD RECEPTACLE
Figure 7. Jazzy 600 Series Electrical Components
Jazzy 600 Series
Y O U R
CHARGER CIRCUIT FUSE
AMMETER
www.pridemobility.com
P O W E R
BATTERY CONNECTOR
C H A I R
MAIN CIRCUIT BREAKER
19